- Wheel Material: Keyed Polyurethane with Twin Precision Bearings
- Wheel Diameter: 150mm
- Tread Width: 40mm
- Mount Height: 189mm
- Weight Rating: 600KG
- Turning radius swivel plate: 121mm
- Turning radius swivel plate total brake: 165mm
Our 150mm (6 inch) heavy duty industrial Polyurethane wheel castors with twin precision bearings are an excellent solution for industrial trolleys that weigh up to 2,400kg and roll on all surface types. The mechanically keyed PU will not embrittle or chip off which makes these more suited to environments where there could be heavier loads running on smooth concrete, tiles or lino vinyl floor surfaces. The precision bearings will provide very low rolling resistance.
The castor forks are zinc plate Core Coat finished with clear lacquer that provides best quality corrosion protection. Suitable for use on stainless steel, chrome, aluminium and metal when used in non corrosive environments.
The plate castors can be fastened by bolting the 130x100mm mounting plate using the four 11mm holes with 80x105mm hole centres. The turning radius of the swivel castors is 121mm and the turning radius for the total brake castors is 165mm. The total height from the floor to the top of these castor units is 189mm and each has a maximum rolling safety load rating of 600kg.
The Polyurethane wheels are 150mm diameter x 40mm tread width and have a 12.7mm bore x 60mm hub width and run on two precision bearings in the centre of the wheel.
