- Wheel Material: Fibreglass reinforced Nylon with Plain sleeve
- Wheel Diameter: 100mm
- Tread Width: 32mm
- Mount Height: 135mm
- Weight Rating: 80KG @ 150°C, 70KG @ 180°C, 60KG @ 210°C, 50KG @ 230°C
- Swept radius swivel plate and bolt hole: 91mm
Our 100mm (4 inch) fibreglass reinforced nylon wheel castors are the best solution for hospitality based applications such as 'food baking' ovens. Glass filled nylon can withstand sustained high temperatures and is gentle and quiet on most floor surfaces.
Fibreglass reinforced nylon wheels are the preferred wheel for extended periods of up to 210°C (assuming most of their life is spent outside the oven), and for short periods up to 230°C.
The castor forks are zinc plate Core Coat finished with clear lacquer that provides best quality corrosion protection.
Available in swivel and fixed plate mounting styles or 12.7mm bolt hole.
The plate castors can be fastened by screwing the 96x78mm mounting plate using the four 8mm holes with slotted hole centres, but most commonly used at 60x80mm. The bolt hole castors can be mounted using a single M12 bolt through the centre of the mounting hole.
The swept radius of the swivel castors is 91mm. The total height from the floor to the top of these castor units is 135mm.
The glass filled nylon wheels are 100mm diameter x 32mm tread width and have a 8mm bore x 40mm hub width and run on a plain sleeve bush through the centre of the wheel.
